LC SYSTEMS

Classe 1

Chemical products for commercial purposes, namely, adsorbents and absorbents derived from natural and synthetic materials, in particular derived from activated carbon, biocharcoal, plant charcoal, active coke, microporous materials, more particular from silica gels, molecular sieves and zeolites, metal-organic frameworks (MOFs) and intercalating layered compounds, especially derived from graphites and clay materials, further derived from microporous membranes and superabsorbers, more particularly from superabsorbers for organic liquids, especially for organic solvents, and further derived from organic, inorganic and metal-organic, synthetic and natural binders for the agglomeration, the bonding and the precipitation of aerosols, in particular in the form of nanoparticles, microparticles and macroparticles, all for adsorbing and absorbing solid, liquid and gaseous chemical compounds, contaminants, mists, sprays, aerosols, microorganisms, viruses and biological matter

Classe 4

Dust absorbents, dust wetting agents and dust binding agents, namely, salt pastes, concentrated salt solutions, oils, adhesive surfaces, microfibers, liquid falling films, microporous organic, inorganic and metal-organic materials and shaped materials, in particular plates, spheres and sponges, as well as petroleum based dust suppressing additives, particularly agents for the reduction of surface tension, binders, tacifiers and wetting agents, all for adsorbing and absorbing organic, inorganic and metal-organic dust particles

Classe 6

Metal construction boards, metal construction tubes, metal construction segments being fabricated metal components for building foundations, namely, construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped and oval transverse sections; prefabricated metal buildings, namely, subterranean buildings from metals being transportable buildings; Metal construction boards, metal construction tubes, metal construction segments being fabricated metal components for building foundations, namely, construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections, as well as the corresponding above ground and subterranean buildings from metals, namely, for the modular construction and use as transportable residential buildings and commercial buildings as well as for the use as transportable cabins on ships; Metal construction boards, metal construction tubes, metal construction segments, namely, construction tubes and construction segments being fabricated metal components for building foundations with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections, as well as the corresponding above ground and subterranean buildings from metal, specifically buildings from metal for the use as washing rooms, in industrial plant construction as a workspace, a dust protection tunnel, a spray-painting cabin, a powder coating cabin, an electrophoretic painting facility, a curtain coating facility and a foil coating facility, as a drying facility, and curing facility and as a safe room; Metal construction boards, metal construction tubes, metal construction segments, namely, construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections, as well as the corresponding aboveground and subterranean buildings from metal, specifically, transportable buildings and buildings for use as noise protection, fire protection and the protection of rooms against fires, emissions, electrical overvoltage, burglary, shelling, earthquakes, magnetic fields, electromagnetic radiation and radio waves, UV-radiation, x-rays and gamma radiation, and/or radioactive corpuscular radiation, and alpha radiation, beta radiation and neutron radiation; Metal cladding for building, namely, cladding components for interior construction of masonry, walls, ceilings, parapets, elevators, living rooms and kitchens as well as wall and ceiling cladding components for air-conditioned rooms

Classe 7

Housings and claddings for machines, motors and facilities, made from metals and/or plastics and in particular from metal sheets; Waste disposal units, namely, machines for the disposal and recycling industry for the transport to disposal and recycling facilities of used and loaded up adsorbents, absorbents, dust absorbents, dust wetting agents and dust binding agents, namely, absorbents, dust absorbents, dust wetting agents and dust binding agents derived from natural and synthetic materials, in particular active charcoals, biocharcoals, plant charcoals, active coke, microporous compounds, especially derived from silica gels, molecular sieves and zeolites, further derived from metal organic frameworks (MOFs) and intercalating layered compounds, preferably derived from graphites, and clay minerals, further derived from microporous membranes and superabsorbers, preferably derived from superabsorbers for organic liquids, more preferably for organic solvents, further derived from organic, inorganic and metal-organic, synthetic and natural binders for the agglomeration, the bonding and the precipitation of aerosols sic, filter materials, papers, cardboards textile materials and cardboard packings, which are loaded up with waste materials, namely, with organic, inorganic and metal-organic liquids, gases, solids and precipitates of aerosols, in particular with organic solvents, gases, acids, bases, dyes, pigments and binders, with inorganic gases, acids, bases and pigments and with metal-organic pigments, especially with the aforementioned waste materials from coating facilities, drying facilities and washing facilities; machines for the separation, the disposal and the recycling of used up and loaded up adsorbents, absorbents, dust absorbents, dust wetting agents and dust binding agents for the disposal and recycling industry; machines for the coating industry for the recovery of spray paint from the overspray of spraycoating cabins and plating facilities; machines for the coating industry for the coating, the plating and the adhesive bonding as well as the drying and the curing of the coatings, platings and the adhesive layers on and in workpieces, namely, workpieces for means of transportation on land, on water and in the air, in particular for car bodies for vans, pickup trucks, small transporters, station wagons, small cars, electromobiles, convertibles, sports cars, luxury limousines, safety cars, armored cars, off-road vehicles and SUVs, in particular for floating bodies and their parts, preferably motorboats, rescue boats, rescue islands, masts, smokestacks, stairs, railings and buoys, and in particular for flying objects and their parts, preferably small aircrafts, aircraft fuselages, wings, propellers, turbines, elevators, rudders and cabins, namely, on and/or in workpieces for machines, plants, household appliances, in particular for white products as well as for construction elements, especially for construction elements derived from metals, plastics, natural stones, artificial stones, cement, concrete, glasses, timbers and ceramics

Classe 9

Measuring and testing instruments for measuring, testing and checking the temperature, the pressure, the moisture content, the chemical composition and the spectroscopic properties and crystal structures of chemical compounds, namely, of coating materials, the particle size, the quantity, the density, the flow rate, the odor, the toxicity and the color of solid, liquid and gaseous particulate materials, the curing rate, the cross-linking density, the optical, chemical, mechanical properties and the thickness of coatings and the glass temperature and the thermal, chemical and mechanical properties of polymers for the quality control of the surface of coated and uncoated partially assembled products and finished products, namely, for the quality control of car bodies and of coated and uncoated parts of car bodies; Wiring closets and switching cabinets specially adapted for protecting and storing electrical and electronic components, metallic electrical cables, fiber optical cables and computers made from metal and plastics; downloadable and recorded software for the thermodynamic control of drying facilities dependent to the demand, namely, drying tunnels and drying cabinets

Classe 12

Track motor vehicles and four wheeled motor vehicles; ski lift gondolas; rail vehicles, namely, trains and structural parts therefor; all-terrain, self-propelled tracked carriers being vehicles; slides being transportation means and transportation frames and skids, namely, tractor trailers, for the transportation of workpieces, namely, of metal parts, tools, machines, machine parts, car bodies and their parts, bodyworks of track vehicles and their parts, boat hulls in their parts, aircraft fuselages and their parts, wings, rudders, elevators, cockpits and their parts construction boards, construction tubes, construction segments, in particular construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections for buildings, in particular for stationary and transportable buildings, especially walls, ceilings, doors, door frames and windows, through dust protection tunnels, plating facilities and coating facilities, in particular for the electrophoretic coating, the spray coating, the powder coating, the curtain coating and the foil coating, through drying installations and curing installations, in particular for the heat cure and/or hardening, for the cure and/or hardening with actinic radiation (dual cure) of applied coatings, platings and adhesive layers, preferably during the original equipment manufacturing (OEM) and in the repair coating

Classe 17

Insulation materials and barrier materials, namely, organic and/or inorganic insulating materials and barrier materials, in particular organic and inorganic isolating materials and barrier materials in the form of fibers, fleeces, woven fabrics, porous and microporous layers, preferably derived from wool, natural fibers, synthetic fibers, mineral papers, cement foam layers, hardboards and aerogels; Structural insulated construction panels, namely, insulation panels containing at least one layer of metal, wood, glass, ceramic, stone, cement, concrete and/or plastics and at least one layer of the aforementioned insulation materials and barrier materials

Classe 19

Prefabricated non-metal buildings, namely, aboveground and subterranean buildings made from construction boards, construction tubes and construction segments, in particular construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections, in particular, transportable buildings made of timbers, glass, ceramics, cement, concrete, bricks, plastics and stones, in particular for the modular building construction and for the use as transportable residential buildings or transportable commercial buildings as well as for the use in the monolithic and the prefabricated lightweight building construction and/or as a safety room; Prefabricated non-metal buildings, namely, aboveground and subterranean buildings from construction boards, construction tubes and construction segments, in particular construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections, namely, transportable buildings, being transportable buildings made of timbers, glass, ceramics, cement, concrete, bricks, plastics and stones, for the use as noise protection, fire protection and the protection against emissions, electrical overvoltage, shelling, earthquakes, magnetic fields, electromagnetic radiation and radioactive radiation and burglary

Classe 28

Sledges for use in downhill amusement rides

Classe 36

Leasing and renting of buildings, namely, of transportable buildings, in particular made from metal, timbers, glass, ceramics, cement, bricks, plastics and/or stones, preferably of modular building constructions, more preferably of transportable residential buildings or of transportable commercial buildings and of transportable cabins on ships, wet rooms and safety rooms, most preferably for noise protection, fire protection, the protection against emissions, electrical overvoltage, burglary, shelling, earthquakes, magnetic fields, electromagnetic radiation and/or radioactive radiation

Classe 37

Technical consulting services and technical planning services for lighting systems, namely, for lighting tunnels, as well as for light distributors for the illumination and the inspection of surfaces, in particular for the illumination and the inspection of coated and uncoated car bodies, namely, cars bodies and of coated and uncoated parts of bodyworks, and parts of car bodies; Technical consulting services and technical planning services for buildings, namely, transportable buildings, and for the modular construction and for the use as transportable residential buildings or commercial buildings, as well as for the use as transportable cabins on ships, for the use as wet rooms, as safety rooms, as shelling resistant rooms and as earthquake-proof rooms or for the use as noise protection, as fire protection and the protection against emissions, electrical overvoltage, burglary, shelling, earthquakes, magnetic fields, electromagnetic radiation and radioactive radiation; Cleaning of building external surfaces, namely, walls, roofs, window panes and chimneys, home interior surfaces, namely, walls, doors, window panes and ceilings, and floor surfaces from chalking, efflorescence, rust, corrosion residues, decomposition products, fire residues, biomasses, graffiti, smearing, dyestuffs, chemicals and microbes, using plating materials, coating agents, cleaning agents, cleaning oils and articles for cleaning purposes; application of coatings to the bodies of cars, motorcycles, bicycles, buses, trucks, trams, train wagons, ships, boats and airplanes, and to workpieces, namely to metal parts, tools, machines, machine parts, parts of car bodies, bodyworks and parts of track vehicles, boat hulls and their parts, aircraft fuselages and their parts, wings, rudders, elevators, cockpits and their parts, construction boards, construction tubes, construction segments, namely, construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections for buildings, namely, for stationary and transportable buildings, specially, for walls, ceilings, doors, door frames and windows, to the exterior of buildings and to floors, namely, hardwood floors; grouting services; plastering; application of adhesive bonding to the bodies of cars, motorcycles, bicycles, buses, trucks, train wagons, ships, boats and airplanes, and to workpieces, namely to metal parts, tools, machines, machine parts, parts of car bodies, bodyworks and parts of track vehicles, boat hulls and their parts, aircraft fuselages and their parts, wings, rudders, elevators, cockpits and their parts, construction boards, construction tubes, construction segments, namely, to construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections for buildings, namely, for stationary and transportable buildings, specially, walls, ceilings, doors, door frames, windows and window frames, to the exterior of buildings and to floors, namely, hardwood floors; cement parging of interior and exterior stone block and concrete foundations; glazing glasswork; riveting; bolting services in the nature of repair and maintenance of bolting machines and tools, namely, providing services to install and tighten metal fasteners; installation and tightening of bolts, namely, installation of bolts and metal fasteners for construction; cleaning of industrial machines and of the exterior and interior surfaces of automobiles, trucks buses, trams, wagons, boats, ships, aircrafts and buildings; polishing of surfaces made of leather, plastics, coatings, ceramics and metals and combinations of these materials ,namely, of the surfaces of shoes, floors, metal sheets and coatings on the exterior and interior surfaces of automobiles, trucks buses, trams, wagons, boats, ships and aircrafts

Classe 39

Transportation logistics, namely, arranging the transportation of goods of others, namely, arranging the transportation of the bodies of cars, motorcycles, bicycles, buses, trucks, trams, train wagons, ships, boats and airplanes, and of workpieces, namely of metal parts, tools, machines, machine parts, parts of car bodies, bodyworks and parts of track vehicles, boat hulls and their parts, aircraft fuselages and their parts, wings, rudders, elevators, cockpits and their parts, construction boards, construction tubes, construction segments, namely, of construction tubes and construction segments with rectangular, trapezoid, pentagonal, hexagonal, crescent-shaped, circular segment shaped, circular and oval transverse sections for buildings, namely, for stationary and transportable buildings, specially, for walls, ceilings, doors, door frames, windows and window frames through processing stations in production lines, in particular through coating lines, coating cabins, drying cabins, drying tunnels, cooling tunnels and cooling cabins

Classe 40

Metalworking, namely, sheet-metal forming and sheet-metal processing, and plastic processing (processing of materials); 3D printing of goods, namely, of toys, models, furniture, appliances, tools, machines and machine parts, buildings and building parts, three-dimensional structures and structural parts and works of art and design; metal stamping; plating of metals, namely, of silver, copper gold, vanadium, chromium, molybdenum, manganese, rhenium, ruthenium, osmium, rhodium, iridium, nickel, palladium and platinum; welding; metalworking in the form of crimping metal; grinding; slicing of metal; polishing of minerals, gemstones, diamonds and glasses, namely window panes; precision lapping services, namely for surfaces made of leather, plastics, coatings, ceramics and metals and combinations of these materials, namely, of the surfaces of shoes, floors, metal sheets and coatings on the exterior and interior surfaces of automobiles, trucks buses, trams, wagons, boats, ships and aircrafts; treatment of materials for third parties, namely, treatment of goods and semi-finished products and treatment of workpieces, each of plastics, synthetic materials, metal, metal alloys, glass, ceramics or combinations of these materials, by means of flaming, roughening, cleaving, cutting, laser cutting, milling, etching, vaporizing, polishing, chemical vapor deposition, bending and forming

Classe 42

Material testing services; Design and testing for new product development, namely, development and testing of calculation methods, algorithms and software for the control of workstations in production lines, in particular of coating lines, coating cabins, drying cabins, drying tunnels, cooling tunnels and cooling cabins, preferably in the automobile industry